Ortofon Concorde Scratch MKII Twin, spherical stylus for scratching, high output voltage, perfect for scratch of all music with deep thomann bass frequences, output power: 10 mV, frequency range: 20 - 18.000 Hz, Tracking force: 4g, without replacement stylus, set comprising 2 pieces, incl. case
Das Concorde Elite ist ein Moving-Magnet-Tonabnehmersystem der Premium-Klasse. Es basiert auf der Technologie der Ortofon Concorde MkII-Serie. Dank der Optimierung zahlreicher Komponenten bietet das Elite eine Klangqualität, die bisher bei Tonabnehmern für DJs nicht zu finden war.
Kanalbalance bei 1 kHz
1 dB
Ausgangsspannung bei 1 kHz, 5cm/Sek
8,5 mV
Kanaltrennung bei 1 kHz
25 dB
Kanaltrennung bei 15 kHz
15 dB
Tracking-Fähigkeiten bei 315Hz bei empfohlenem Auflagekraft
100 μm
Compliance, dynamisch, lateral
13 μm/mN
Abtastdiamant
Nude Elliptical diamond
Diamant-Verrundungsradien
r/R 8/18 μm
Auflagekraftbereich
2,0 - 4,0 g
Empfohlene Auflagekraft
3,0 g
Abtastwinkel
20°
Interner Widerstand, Gleichstromwiderstand
1,2 kOhm
Empfohlene Lastimpedanz
150 - 400 pF
Tonabnehmerfarbe
Schwarz/Gold
Tonabnehmergewicht
18,5 g
Empfohlener Lastwiderstand
47 kOhm
Interne Induktanz
800 mH
Die Ersatznadel für das Concorde MKII Elite verfügt über ein speziell geformtes Gehäuse mit echter Goldbeschichtung. Umgeben von diesem Gold ist ein elliptisch nackter Diamant, der auf einem steifen Aluminium-Nadelträger montiert ist. Ein solcher elliptisch nackter Diamant wird normalerweise in HiFi-Tonabnehmern verwendet und liefert einen so kraftvollen und detaillierten Klang, dass seine Performance an ein Live-Konzert erinnert.
Dieser Diamant weist durch seine Bauweise als kompletter, nackter Diamantstift eine geringere bewegte Masse auf und sorgt damit für eine verbesserte und detailreiche Klangqualität. Sein schlankes Profil ermöglicht es ihm, den Schwingungen der Plattenrillen genauer zu folgen und somit komplexere Details herauszuarbeiten und selbst höchste Frequenzen sicher abzutasten.
Kanalbalance bei 1 kHz
1 dB
Ausgangsspannung bei 1 kHz, 5cm/Sek
8,5 mV
Kanaltrennung bei 1 kHz
25 dB
Kanaltrennung bei 15 kHz
15 dB
Tracking-Fähigkeiten bei 315Hz bei empfohlenem Auflagekraft
100 μm
Compliance, dynamisch, lateral
13 μm/mN
Abtastdiamant
Elliptisch, nackt
Diamant-Verrundungsradien
r/R 8/18 μm
Auflagekraftbereich
2,0 - 4,0 g
Empfohlene Auflagekraft
3,0 g
Abtastwinkel
20°
Tonabnehmergewicht
Ersatznadel = 1 g
* ONLY FOR THE NEW CONCORDE GENERATION !!!
The DJ stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.
• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out
Stylus MIX Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde MkII MIX
Styli protection caps for Concorde MkII cartridges and styli, come in pairs.
Nightclub MkI Replacement Stylus
Following in the footsteps of the legendary Nightclub series, the re-engineered Nightclub MkII boasts numerous sonic improvements in both club and studio settings.
With a new cartridge body, the Nightclub MkII offers increased output voltage for powerful, energetic sound and enhanced performance from integrated phono preamps such as the ones found in DJ mixers. Superb sound quality!
Club DJ and studio workers believe the Nightclub MkII to be an absolute high-end cartridge. It is indeed a no-nonsence performer with fascinating musical resources. Its output is superb with a frequency response rating high enough to compare Nightclub MkII to any audiophile cartridge. The special elliptical stylus guarantees sound with insignificant scratching.
Nightclub MkII Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1.5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +/- 1.5 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 20 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g
* ONLY FOR THE NEW CONCORDE GENERATION !!!
The SCRATCH stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.
• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out
Stylus SCRATCH Technical data
Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde MkII SCRATCH
Ortofon Concorde Club MKII System, universal elliptic stylus, especially for Clubs and studio applications, high output voltage requires less gain thomann from the preamps and less susceptibility to feedback in live applications, also for transferring to anny digital storage media, output power: 8 mV, frequency range: 20 - 20.000 Hz, Tracking force: 3g, without replacement stylus
Ortofon Concorde Club MKII System, universal elliptic tylus, especially for Clubs and studio applications, high output voltage requires less gain thomann from the preamps and less susceptibility to feedback in live applications, also for transferring to anny digital storage media, output power: 8 mV, frequency range: 20 - 20.000 Hz, Tracking force: 3g, without replacement stylus, set comprising 2 pieces, incl. case
A limited edition of 100 pieces, the Ortofon-Cocoon Twin set includes two Concorde MKI cartridges decorated with distinctive Cocoon design in gold. The Cocoon Twin Set comes in an exclusive suit case with Ortofon and Cocoon in specially designed gold packaging. The Stylus Cocoon is a cartridge designed for club environments, renowned for its robust build and exceptional audio fidelity.
High output
Special Elliptical Stylus
Withstands heavy back-cueing
Premium sound quality
Optimized for club use
Developed in collaboration with Ortofon
Specifications
Channel balance at 1 kHz
1,5 dB
Output voltage at 1 kHz, 5cm/sec
8 mV
Channel separation at 1 kHz
23 dB
Frequency response 20 Hz - 20 kHz
+/-1,5 dB
Tracking ability at 315Hz
80 μm
Compliance, dynamic, lateral
7 μm/m N
Stylus type
Special Elliptical
Tracking force range
2.0-5.0 g (20-50 mN)
Tracking force, recommended
3.0 g (30 mN)
Cartridge weight stylus = 1 g
* ONLY FOR THE NEW CONCORDE GENERATION !!!
The DJ stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.
• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out
Stylus DJ Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde MkII DJ
Der zuverlässige Allzweck Tonabnehmer mit sphärischer Nadel sorgt für eine starke Rillenlage bei optimaler Festigkeit bei geringer Reibungsverzerrung.
Features:
direkte SME-Befestigung
Nadelschliff sphärisch
sehr gut zum Scratchen geeignet
sehr guter Klang
hoher Ausgangspegel
Technische Daten:
Frequenzgang: 20 Hz - 18 kHz
Ausgangsspannung (5 cm/s): 6 mV
Auflagebereich: 2 - 5 g
empfohlene Auflagekraft: 4 g
Gewicht: 18,5 g
* ONLY FOR THE NEW CONCORDE GENERATION !!!
The CLUB stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.
• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐outStylus CLUB Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Special Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde MkII CLUB
Der zuverlässige Allzweck Tonabnehmer mit sphärischer Nadel sorgt für eine starke Rillenlage bei optimaler Festigkeit bei geringer Reibungsverzerrung.
Features:
direkte SME-Befestigung
Nadelschliff sphärisch
sehr gut zum Scratchen geeignet
sehr guter Klang
hoher Ausgangspegel
Technische Daten:
Frequenzgang: 20 Hz - 18 kHz
Ausgangsspannung (5 cm/s): 6 mV
Auflagebereich: 2 - 5 g
empfohlene Auflagekraft: 4 g
Gewicht: 18,5 g
Ortofon Concorde DJ MKII Twin, universal spherical stylus, especially for Scratching and Backcueing, longest running values, high output, tracking ability, thomann works for any genres, output power: 6 mV, frequency range: 20 - 20.000 Hz, Tracking force: 4g, without replacement stylus, set comprising 2 pieces, incl. case
Ortofon Concorde DJ MKII System, universal spherical DJ stylus, especially for Scratching and Backcueing, longest running values, high output, tracking thomann ability, works for any genres,
output power: 6 mV,
frequency range: 20 - 20.000 Hz,
Tracking force: 4g,
without replacement stylus
Ortofon Concorde Mix MKII Twin, universal spherical stylus, especially for Scratching and Backcueing, longest running values, high output, tracking ability, thomann works for any genres, output power: 6 mV, frequency range: 20 - 20.000 Hz, Tracking force: 3 g, without replacement stylus, set comprising 2 pieces, incl. case
Ortofon Concorde Mix MKII System, universal spherical stylus, especially for Scratching and Backcueing, longest running values, high output, tracking ability, thomann works for any genres, output power: 6 mV, frequency range: 20 - 20.000 Hz, Tracking force: 3 g, without replacement stylus
VNL - "In ViNyL we trust"
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.
Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.
Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.
The VNL features and improvements
? Extra resistance to hardcore scratching and back spinning
? High tracking performance for both DVS usage and real vinyl
? Optimal balance of output and of sound quality
Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.
VNL Premounted
Expertly paired and premounted on our popular black SH-4 Headshell, the VNL Single cartridge is compatible with any standard DJ turntable and tonearm.
The quality of the SH-4 headshell is sturdy and rigid, with high quality tonearm terminal connections. One of the standout features of the VNL Premounted cartridge is its versatility. The universal mount fitting allows it to be used with a wide range of S-shaped tonearms, making it a great option for DJs who use multiple setups. The ergonomic design of the headshell includes a long finger lift that is easy to pick up and use, making it ideal for busy DJ sessions. And with its plug and play design, the VNL Premounted cartridge is ready to go right out of the box!
Features:
?Premounted on Ortofon SH-4 Black headshell
?Universal mount fitting a wide range of S-shaped tonearms
?Correct Baerwald alignment with the major part of tonearms with universal mount
The VNL Premounted is supplied with the stylus VNL II premounted on the VNL cartridge body.
3 different feels to fine-tune your performance
To match the multiple applications of modern DJs, the VNL is interchangeable with 3 different styli with suspension types of varying feel and rigidity:
- Stylus VNL I compliance, dynamic lateral 16 μm/m N - Flexible
- Stylus VNL II compliance, dynamic lateral 15 μm/m N - Rigid
- Stylus VNL III compliance, dynamic lateral 14 μm/m N - Firm
DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.
All three VNL styli variants are available separately.
The VNL SINGLE PACK is supplied with the stylus VNL II premounted on the VNL cartridge body.
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommended tracking force:
VNL I 100 μm
VNL II 90 μm
VNL III 90 μm
Compliance, dynamic lateral:
VNL I 16 μm/m N
VNL II 15 μm/m N
VNL III 14 μm/m N
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III
Antiskating: for best backcueing performance use “0”
Ortofon Concorde Scratch MKII System, spherical stylus for scratching, high output voltage, perfect for scratch of all music with deep thomann bass frequences, output power: 10 mV, frequency range: 20 - 18.000 Hz, Tracking force: 4g, without replacement stylus
Concorde-Version Made by Ortofon, gelb, Baugleich mit Ortofon CC Pro / CC ProS
Sphärischer Diamantschliff
Die Tonar Banana DJ ist eine Ersatz-Nadel für den bekannten Tonar Banana Pickup, basierend auf dem Concord-Design. Die Nadel besitzt eine ausgezeichnete Qualität und bleibt zuverlässig in den Rillen der Platte liegen.
Produkt Informationen
Farbe/Oberfläche Gelb
Set Nein
Nadelschliff spherisch
Ersatzteil Plattenspieler System, stylus
Gewicht und Maße sind inklusive Verpackung
Gewicht (inkl. Verpackung) 10 gr
Maße (inkl. Verpackung) 13,0 x 1,5 x 8,0 cm
Produktdetails
Tonar Banana DJ Nadel
Reserve-Nadel für den Tonar Banana Pickup
Nadeltyp: 0,7 mm sphärisch
Frequenzbereich: 20 – 20.000 Hz
Ausgangsleistung: 5 mV (5 cm/Sek.)
Kanaltrennung: 20 dB (1 KHz)
Kanalbalance: 2 dB oder weniger (1 KHz)
Nadeldruck: 3 – 5 g (4 g empfohlen)
Nightclub E Replacement stylus
Nightclub E is equipped with Special Elliptical diamond. Perfect for usage in clubs. Superb sound quality.
Club DJs and studio workers believe the Nightclub E to be an absolute high-end cartridge. It is indeed a no-nonsence performer with fascinating musical resources.
It's output is superb with a frequency responce rating high enough to compare the Nightclub E to any audiophile cartridge.
The special elliptical stylus guarantees sound with insignificant scratching.
Nightclub E Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +/- 1.5 dB
Tracking ability at 315 Hz at recommended tracking force - 65 μm
Compliance, dynamic lateral - 20 μm/m N
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 μm
Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g
Ersatznadel für das System Ortofon Gold Concorde und Ortofon Nightclub MK II OM.
Das Ortofon Gold wurde von den limitierten Technics SL-1200 LTD inspiriert. Das Ziel: Den exklusivsten DJ-Tonabnehmer zu entwickeln, den es bisher gegeben hat. Das Gold-System ist ausschließlich als Concorde-Version mit elliptischem Schliff erhältlich, um den besten Sound zu garantieren, der mit einer Nadel möglich ist. Für DJs, die sich nur mit dem Maximum zufrieden geben.
Features
* Nadelschliff elliptisch
* herausragende Klangqualität
* sehr gut zum Mixen geeignet
technische Daten
* Frequenzgang: 20 Hz - 20 kHz
* Ausgangsspannung: 6 mV
* Auflagekraftbereich: 2,0 - 5,0 g
* empfohlene Auflagekraft: 3,0 g
Nightclub S Replacement Stylus
The Nighclub S stylus is amongst the top performers in its category, Scratch and Mix.
A spherical diamond and a customised design provide the basis for the cartridge's undeniable supremacy.
The stylus remains in the groove during the scratching and back-cueing, making it unfailingly reliable - even when giving a night-long performance.
Nightclub S Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-18.000 Hz +3 / - 2 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g
Pro S Replacement stylus
The Pro S entry-level cartridge is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment.
The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.
No matter what the application, the Pro S provides remarkable versatility for virtually any setting.
The sound quality is absolutely not to worry about.
The Pro S is a consistent performer and a fine all-arounder!
Pro S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-18.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde / OM cartridge weight - 18.5 g / 5.0 g
Exchangeable reinforced finger lift for Concorde MkII series
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area
The new finger lift is one of the major improvements: it’s now stand alone replaceable part.
Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.
Exchangeable reinforced finger lift for Concorde MkII series
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area
The new finger lift is one of the major improvements: it’s now stand alone replaceable part.
Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.
Exchangeable reinforced finger lift for Concorde MkII series
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area
The new finger lift is one of the major improvements: it’s now stand alone replaceable part.
Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.
Stylus protection caps for Concorde MkI and OM series cartridges and styli, come in pairs.
Scratch Replacement Stylus
As implied by the name, the Scratch is intended especially for the disciplines of scratch and back-cueing.
It is made of a fluorescent neon-red material with the intention it becoming highly apparent in spotlight and luminous in ultraviolet light. For DJs that require increased tracking ability, the Scratch is up to the task.
Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
Very high output! Maximum scratch performance guaranteed!
Scratch Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g
Exclusively designed E.T. character on top and "THUD RUMBLE" and "OSGEMEOS" tags on both sides of the cartridge. Features the exact "industry standard" audio specifications of DJ Q.Bert's Concordes with the deluxe allure of Gold.
The Q.Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch.
Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.
Q.Bert Gold stylus Technical data
- Output voltage at 1000Hz, 5cm/sec. - 11 mV
- Channel balance at 1kHz - 1,5 dB
- Channel separation at 1kHz - 22 dB
- Frequency range at -3dB - 20-18.000 Hz
- Frequency response - 20-20.000 Hz -3 dB
- Tracking ability at 315 Hz at recommmended tracking force - 980 μm
- Compliance, dynamic lateral - 12 μm/m N
- Stylus type - Spherical
- Stylus tip radius - R 18 μm
- Tracking force range - 2,0-4,0 g (20-40 mN)
- Tracking force recommended - 3,0 g (30 mN)
- Tracking angle - 20°
- Internal impedance, DC resistance - 1.680 Ohm
- Internal inductance - 920 mH
- Recommended load resistance - 47 kOhm
- Recommended load capacitance - 200-400 pF
- Cartridge weight - 18,5 g
Compatible with cartridges - Q.Bert Gold Anniversary (discontinued and no longer available) and Q.Bert
Exchangeable reinforced finger lift for Concorde MkII series
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area
The new finger lift is one of the major improvements: it’s now stand alone replaceable part.
Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.
DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g
Cocoon Replacement stylus
The Ortofon-Cocoon is the ultimate Club cartridge of superb sound quality!
Ortofon-Cocoon Twin Set Limited edition of 500 units was introduced at the Frankfurt Music Trade Show 2013.
Special cartidge design developed by the famous Club Brand Cocoon.
Features:
- Direct SME mounting for easy set-up
- Special Elliptical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Premium sound quality
- Extra value package includes Stylus protection guards/pair and a Stylus brush
Cocoon Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +/-1,5 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Special Elliptical
Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g
Exchangeable reinforced finger lift for Concorde MkII series
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area
The new finger lift is one of the major improvements: it’s now stand alone replaceable part.
Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.
Pro Replacement Stylus
Great performance and durability as to basic scratch and back-cueing is what the Pro is known for.
It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.
The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.
The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music. With flat, transparent sound across the spectrum and excellent handling ability, the Pro Series represents one of the longest running values in DJ cartridges.
Ideal choice for talented, but less experienced DJs!
Pro Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +3/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 / 5.0 g
Elektro Replacement stylus
Every professional ought to try the Elektro, a techno cartridge made by a team of highly qualified technicians and experienced and capable DJs. Despite its sleek white styling, the Elektro isn't just another pretty face. Also featuring a reinforced rubber suspension, the Elektro is the perfect hybrid needle for the artist who both mixes and scratches.
Enhanced tracking ability and excellent sound quality combine to form a unique balance of form and functionality. With bold, round sound, the Elektro brings your music to life, whether you're in the club or the studio
Unaffected by extreme sound pressure and repeated vibrations, it has a very high output. The musical performance is always first-rate and the tracking ability of the spherical diamond stylus is quite good.
Elektro Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7.5 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20 – 18.000 Hz +3/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g
Die praktische Transportbox für drei Tonabnehmersysteme - Jetzt noch handlicher und im stylischen - reversed-zip' sowie schicken Ballistic-Nylon Gewand. Ausgestattet mit einer Halterung für 3 Headshell oder Concorde Systeme, einem schützendem Hartplastik-Korpus sowie einem kleinem Netzfach für Zubehör, ist dieses kompakte Nylon-Case die Transportlösung schlechthin.
Features:
Passend für alle herkömmlichen Concord (SME) und Headshell-Systeme (Ortofon Concorde, Stanton Trackmaster, Shure M44-7, Stanton 500 etc.)
Wasserabweisendes Ballistic-Nylon 1680D
Integrierter Hartplastik-Korpus und weiche Innenpolsterung
Netzfach mit Zipper für Werkzeug und Ersatznadeln
Robuster Reißverschluss im - Reveresd-Zip' Style
