quête:ortofon

* ONLY FOR THE NEW CONCORDE GENERATION !!!

The DJ stylus features

Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Stylus DJ Technical data

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde MkII DJ

Der zuverlässige Allzweck Tonabnehmer mit sphärischer Nadel sorgt für eine starke Rillenlage bei optimaler Festigkeit bei geringer Reibungsverzerrung.

Features:

direkte SME-Befestigung
Nadelschliff sphärisch
sehr gut zum Scratchen geeignet
sehr guter Klang
hoher Ausgangspegel

Technische Daten:

Frequenzgang: 20 Hz - 18 kHz
Ausgangsspannung (5 cm/s): 6 mV
Auflagebereich: 2 - 5 g
empfohlene Auflagekraft: 4 g
Gewicht: 18,5 g

GT Replacement stylus for tough handling - extremely sturdy for scratching DJs

GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

As a rule, never use more than half of normal antiskating related to the tracking force! To make GT even more resistant against violent handling, such as drop or touch of fingers, we have made a rubber suspension of the cantilever even more rigid against axial pull.

GT Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 18 dB
Frequency response - 20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF

DJ S Replacement stylus

DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!

DJ S Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

* ONLY FOR THE NEW CONCORDE GENERATION !!!

The CLUB stylus features

Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐outStylus CLUB Technical data

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Special Elliptical r/R 13/25 μm

Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde MkII CLUB

Cocoon Replacement stylus

The Ortofon-Cocoon is the ultimate Club cartridge of superb sound quality!

Ortofon-Cocoon Twin Set Limited edition of 500 units was introduced at the Frankfurt Music Trade Show 2013.

Special cartidge design developed by the famous Club Brand Cocoon.

Features:

- Direct SME mounting for easy set-up
- Special Elliptical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Premium sound quality
- Extra value package includes Stylus protection guards/pair and a Stylus brush


Cocoon Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +/-1,5 dB

Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Special Elliptical
Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Exchangeable reinforced finger lift for Concorde MkII series

• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

*Illustration similar / Abbildung ähnlich

Ortofon cartridge alignment protractor

An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.

When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.

Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.

An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.

Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

Elektro Replacement stylus

Every professional ought to try the Elektro, a techno cartridge made by a team of highly qualified technicians and experienced and capable DJs. Despite its sleek white styling, the Elektro isn't just another pretty face. Also featuring a reinforced rubber suspension, the Elektro is the perfect hybrid needle for the artist who both mixes and scratches.

Enhanced tracking ability and excellent sound quality combine to form a unique balance of form and functionality. With bold, round sound, the Elektro brings your music to life, whether you're in the club or the studio

Unaffected by extreme sound pressure and repeated vibrations, it has a very high output. The musical performance is always first-rate and the tracking ability of the spherical diamond stylus is quite good.


Elektro Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 7.5 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20 – 18.000 Hz +3/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Pro Replacement Stylus

Great performance and durability as to basic scratch and back-cueing is what the Pro is known for.

It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.
The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.
The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music. With flat, transparent sound across the spectrum and excellent handling ability, the Pro Series represents one of the longest running values in DJ cartridges.

Ideal choice for talented, but less experienced DJs!


Pro Stylus Technical Data

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +3/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 / 5.0 g

- Frequenzgang: 20 Hz - 18 kHz
- Ausgangsspannung (5 cm/s): 5 mV
- Auflagekraftbereich: 3 - 5 g
- empfohlene Auflagekraft: 4 g

Features:

direkte SME-Befestigung
Nadelschliff sphärisch
sehr gut zum Scratchen geeignet
sehr guter Klang
hoher Ausgangspegel

Technische Daten:

Frequenzgang: 20 Hz - 18 kHz
Ausgangsspannung (5 cm/s): 6 mV
Auflagebereich: 2 - 5 g
empfohlene Auflagekraft: 4 g
Gewicht: 18,5 g

DS-3 is a new lightweight compact digital stylus pressure gauge model. The DS-3 is a miniature ultra precision non-magnetic instrument that tunes your tonearm to the highest possible degree. The DS-3 scale is factory pre-calibrated for high accuracy measurements with the tolerance of +/-0.01 g.

How to use the DS-3

• Turn on the device by pressing ON button. The display will show 0000.
• Press the UNIT button to select the measurement unit. The default setting is gram/g.
• Place the stylus on the measurement plate on the right side of the device. Display will start blinking. It will stop blinking when the measurement is completed. The value displayed on the screen is the stylus pressure.
• The display screen will automatically dim to saving mode after 5 seconds of inactivity and turn off after 60 seconds of inactivity.
• When a battery runs out, a LO indicator will flash on the screen. Then replace both batteries.
• PCS button balances count by calculating the average weight of one piece-weight called a unit weight, then applying it to the total weight of what you are trying to count. Firstly, weigh one PC, then weigh the bundle, then push the PCS button and on the display you’ll get a number of PCS.

Technical data and precautions
•Sensitivity - 0.01g
•Operational weight range - 0.1g to 200g
•Battery - 2 × AAA
•Size - (L) 120mm × (W) 60mm × (H) 17mm
•Weight - 70g
•LCD screen with back lighting
•Auto off function
•Protect the device against high temperatures, dust and humidity
•Carefully lower the measurement object on the measurement plate
•Operating temperature range +10⁰ - +30⁰C
•Do not place objects weighting more than 200 g on the measurement plate
•Do not place the device on an uneven surface, it may result in not accurate measurements

Der zuverlässige Allzweck Tonabnehmer mit sphärischer Nadel sorgt für eine starke Rillenlage bei optimaler Festigkeit bei geringer Reibungsverzerrung.

Features:

direkte SME-Befestigung
Nadelschliff sphärisch
sehr gut zum Scratchen geeignet
sehr guter Klang
hoher Ausgangspegel

Technische Daten:

Frequenzgang: 20 Hz - 18 kHz
Ausgangsspannung (5 cm/s): 6 mV
Auflagebereich: 2 - 5 g
empfohlene Auflagekraft: 4 g
Gewicht: 18,5 g

Ortofon Concorde Mix MKII System, universal spherical stylus, especially for Scratching and Backcueing, longest running values, high output, tracking ability, thomann works for any genres, output power: 6 mV, frequency range: 20 - 20.000 Hz, Tracking force: 3 g, without replacement stylus

Ortofon Concorde Mix MKII Twin, universal spherical stylus, especially for Scratching and Backcueing, longest running values, high output, tracking ability, thomann works for any genres, output power: 6 mV, frequency range: 20 - 20.000 Hz, Tracking force: 3 g, without replacement stylus, set comprising 2 pieces, incl. case

Ortofon Concorde DJ MKII System, universal spherical DJ stylus, especially for Scratching and Backcueing, longest running values, high output, tracking thomann ability, works for any genres,

output power: 6 mV,
frequency range: 20 - 20.000 Hz,
Tracking force: 4g,
without replacement stylus

Ortofon Concorde DJ MKII Twin, universal spherical stylus, especially for Scratching and Backcueing, longest running values, high output, tracking ability, thomann works for any genres, output power: 6 mV, frequency range: 20 - 20.000 Hz, Tracking force: 4g, without replacement stylus, set comprising 2 pieces, incl. case

Das aus dem Hause Ortofon stammende Profisystem Tonar Banana ist ein absoluter Leckerbissen. Es überzeugt nicht nur durch das ansprechende Design, sondern auch durch die vorzüglichen technischen Eigenschaften. Die spezielle Heavy Duty Aufhängung, der integrierte Gewichtring und der sphärische Schliff sorgen für eine super spurgetreue Abtastung. Back-Cueing und Scratchen sind mit der Banana völlig unproblematisch. Für die praxisgerechte Anwendung ist die Nase des Tonabnehmers ausgeschnitten und das System mit einer gut sichtbaren Farbe versehen, was die Handhabung im Dunkeln natürlich vereinfacht. Ein ausgefallenes System, welches nicht nur durch seine Farbe, sondern auch durch die technischen Eigenschaften für jeden Einsatz geeignet ist!

Frequenzgang: 20-20.000Hz
Auflagebereich: 30-50mN
Ausgangsspannung 5mV
Kanaltrennung: 20dB
Typ: sphärischer Diamantschliff
Auflagekraftbereich: 2 - 5g
empfohlene Auflagekraft: 3g
Farbe: Gelb
Gewicht: 16g